Garage Door Won’t Close After Power Outage? (Fix It Now!) | Upgraded Home (2022)

Garage Door Won’t Close After Power Outage? (Fix It Now!) | Upgraded Home (1)

Power outages are always frustrating for the homeowner. However, they can also cause more than just inconvenience. When the power surges, it can leave your garage stuck open and your belongings vulnerable.

If your garage door won’t close after a power outage, check for the quick-release mechanism on your garage door opener so that you can manually maneuver it. But first, you need to open the door all the way and then pull down on the emergency release rope so that you can shut it.

Do You Need a Garage Door Opener Repair or Adjustment?

Get free, zero-commitment quotes from pro contractors near you.


FIND LOCAL CONTRACTORS

Garage Door Won’t Close After Power Outage? (Fix It Now!) | Upgraded Home (2)

How Does a Power Outage Affect the Garage Door?

During a thunderstorm, lightning can be very damaging. Lightning doesn’t have to hit the house directly to cause damage. The electricity from the lightning can destroy any electric appliances in the home and even start fires.

If lightning strikes your garage during a power outage, you need to address the issue as soon as possible.

How to Reconnect the Garage Door After a Power Outage

If the garage door doesn’t open or close after a power outage, you will need to reconnect the garage.

Follow the steps below to reconnect the garage door.

Step 1: Disconnect Power from the Garage Door Opener.If the garage door is closed, unplug the automatic garage door opener.

Step 2: Disconnect the Garage Door Opener from the Door.To disconnect the garage door opener from the door, pull the emergency cord. It should have a red handle and hang down in the center of the garage door motor.

Step 3: Manually Lift the Garage Door.Manually lift the garage door until you completely open it. If the door is balanced correctly, it will stay in place while open. However, if the door is difficult to open, contact a professional to prevent further damage to the door.

(Video) My power went out and my garage door won't open. What now?

Step 4: Manually Close the Garage Door.Manually close the garage door and lock it. When you manually slide the lock bar, you will securely shut the garage.

Step 5: Reconnect the Garage Door.Once you have restored power, reconnect the garage door opener. Make sure that you first unlock the door before you reconnect the opener. If you attempt to open the garage door while locked, it can cause serious damage.

If your garage door does not function after a power outage, you will need to put it in bypass mode.

Ways to Put the Garage Door in Bypass Mode

If your garage door gets damaged after a storm or power outage, you will need to put it into bypass mode. This prevents further damage to the door until a garage door technician can service it.

There are several ways to put the garage door into bypass mode.

Method 1: Set the Door to Manual Mode

Set the door to manual mode to prevent the garage door from falling if opened.

Materials You Will Need:

  • Two 2 x 4 wood planks
  • A helping hand
  • Hammer

Step 1: Double-Check That the Garage Door Is Closed.First, ensure that you have closed the garage door. If you set the door to manual mode while the garage door is open, it can abruptly fall. However, if you cannot close the garage because of a stuck door, move on to the next step.

Step 2: Prop Open the Garage Door.Use two 2 x 4 pieces of wood to prop up the garage door if it’s stuck open. The 2 x 4s should be as tall as the garage door opening. Use a hammer to tap the planks into place between the garage door and floor on either side.

If the garage door has a damaged spring, the planks will prevent the door from slamming shut.

Step 3: Pull the Door’s Manual Release Cord.Pull down on the manual release cord located next to the garage door motor. The cord will disconnect the trolley from the automatic garage door opener. Once you do this, it will allow you to open and close the garage door manually.

Step 4: Remove the 2 x 4 Planks and Close the Garage Door.Remove the 2 x 4 planks and manually close the door. This will require a helping hand. You can remove the planks while someone else holds the door.

Once you remove the wood, carefully lower the garage door to the closed position.

Step 5: Pull the Cord to Open the Garage Door.To open the garage door, pull the cord toward the garage door motor. Pull the cord down and toward the motor when opening the door to prevent the cord from getting stuck. You may also require a helping hand for this step.

(Video) Garage Door Wont Close? 4 Easy Fixes and Reasons Why the Garage Door Is Not Closing

Step 6: Set the Garage Door Back to Automatic Mode.Set the garage door back to automatic mode by pulling the manual release cord toward the door opening. While you do this, you will need to open the garage door simultaneously. This should reconnect the trolley to the automatic opener.

The garage door should now automatically open and close with the remote.

Method 2: Disconnect the Garage Door Sensors

Another way to put the garage door in bypass mode is to disconnect the garage door sensors.

Materials You Will Need:

  • Wire cutters

Step 1: Turn Off the Power.Disconnect the garage door from the power. Flip the circuit that controls the garage, or unplug it from the wall.

Step 2: Locate the Garage Door Sensors.You can find the garage door sensors on each side of the door. The sensors are toward the floor near the opening.

Step 3: Remove the Sensors from the Brackets.Remove the sensors from the brackets by loosening the wing nut. You can find the wing nut on the side of the sensor. Rotate the wing nut clockwise to loosen, freeing the sensors from the brackets.

Step 4: Cut the Wires from the Safety Sensor.Using a wire cutter, cut the black and white sensor wire about 1 inch from the sensor. If done correctly, this will disconnect the safety sensors from the garage door.

Step 5: Reattach the Cut Wires to the New Sensors.When you are ready to turn the sensors back on, reattach the cut wires to the new sensors. Strip the ends of the wires you cut to expose the metal. Twist the black wire that you previously cut to the black wire coming out of the new sensor.

Do the same thing with the white wire, then secure the sensors and their brackets and tighten the wing nuts.

Other Garage Door Problems

Garage doors often come with a host of other issues, too, no matter the model.

Garage Door Opener Doesn’t Work

If you attempt to open the garage door with the remote and there is no response, check the power source. Make sure to plug in the automatic opener and ensure there are no tripped breakers or blown fuses. If you have a battery-operated system, place the battery in the automatic opener and the remote.

Then, if this doesn’t solve the problem, check that the disconnect switch is connected. If it is not connected, it will prevent the door from opening in case of an emergency. Therefore, plug the cord back in then attempt to open the garage again.

Garage Door Will Not Stay Closed

If the garage door does not stay closed, you could have an issue with the safety sensors. The safety sensors automatically reverse the door if there is something in the way or an obstruction in the track. Clean the sensors and tracks to make sure there is no debris.

(Video) HOW FIX YOUR GARAGE DOOR OPENER ONCE YOU HAVE PULLED THE EMERGENCY RELEASE

Another reason the door may not stay closed is that the open and close limits are off-kilter. If the close limit causes the door to lower further than necessary, it will hit the ground and reverse. It does this because it assumes there’s an object blocking the way of closing completely.

Reference your owner’s manual to determine the open and close limits as well as directions on how to reset them.

Garage Door Will Not Stay Open

If the garage door slides down the tracks after it has opened, the track could be misaligned. The alignment gives the door enough space for the weight to drag the door closed again.

Garage Doors Makes Noises While Opening and Closing

If the garage door is particularly noisy when opening and closing, there may be an issue with the spring mechanisms. For example, there might be broken or incorrectly connected tension springs.

Therefore, the opening system won’t have enough strength to handle the door’s weight, causing a loud screech. Contact a professional to examine the springs to determine their condition.

If you hear a squealing noise while the garage door opens, the tracks may need to be lubricated. Additionally, this could also be a sign of misaligned tracks or rusted rollers. If this is the issue, you need to replace the tracks.

Do You Need a Garage Door Opener Repair or Adjustment?

Get free, zero-commitment quotes from pro contractors near you.


FIND LOCAL CONTRACTORS

Garage Door Won’t Close After Power Outage? (Fix It Now!) | Upgraded Home (3)

Related Questions

What is the average price to replace a garage door?

If your garage door becomes damaged beyond repair, you should replace it. On average, garage doors cost about $1,115. They can range from $728 to $1,500.

However, if you have a double car garage, this can increase the price. Replacement and installation for a double car garage can range from $1,500 to $3,500. Typically, you can get the garage door repaired, but it’s better to replace it if it’s more than 15 years old.

What’s the average lifespan of a garage door?

The lifespan of the garage door will vary based on several scenarios. The quality of the garage door, local climate conditions, and regular service will affect the lifespan of the garage door.

(Video) How to fix a garage door that won’t open or close.

According to experts, the average garage door should last between 15 to 30 years. Additionally, automatic garage door openers have a lifespan of 10 to 15 years. Therefore, if you regularly service your garage door, it should be reliable for a significant amount of time.

Stacy Randall

Stacy Randall is a wife, mother, and freelance writer from NOLA that has always had a love for DIY projects, home organization, and making spaces beautiful. Together with her husband, she has been spending the last several years lovingly renovating her grandparent’s former home, making it their own and learning a lot about life along the way.

Recently Published

link to What Size Screws For Door Hinges?

What Size Screws For Door Hinges?

Door hinges are brilliant pieces of hardware that allow heavy doors to seamlessly open and close. You hardly even know they are there until one starts squeaking, or worse, comes loose. If you find...

Continue Reading

link to Easiest Way To Clean Grout Without Scrubbing

Easiest Way To Clean Grout Without Scrubbing

It is tempting to scrub the stubborn dirt, grime, soap scum, debris, mold, and mildew on your grout. However, it is rarely worth it as scrubbing can damage and lift the grout so that moisture can get...

Continue Reading

(Video) Garage door closes, but then opens again!!?? Learn how to fix!

FAQs

Why won't my garage door close when I push the button? ›

When safety sensors are misaligned, the garage door won't close with a remote or a keypad. They have to be clean and lined up with the lights on the same level, facing each other (imagine a straight line between them). You can override the safety eyes by holding down the wall button until the door is completely closed.

How do you reconnect the garage door after pulling the emergency cord? ›

Reconnect to Automated Opener Carriage

When the time comes to reconnect your garage door, simply pull the emergency release cord back toward the door to re-engage the spring lever. You can then manually move the door to the opener carriage or use the doors remote and it will connect automatically.

Why won't my garage door close and light blinks? ›

When you see your garage door opener lights flashing and the garage door will not close, it could be the safety reversing sensors or the LOCK button. If there is a safety reversing sensor issue, the main light(s) flash 10 times. Start with aligning the safety sensors.

Can a power outage damage a garage door opener? ›

The answer is yes! When there is no electricity to operate the garage door system, the power outage does affect your garage door opener. This is why being able to manually open your garage door is important.

How does a power surge affect a garage door opener? ›

As lightning finds its way to the ground via your home's electrical wiring, the resulting power surge can easily overwhelm the delicate electrical wiring inside of your garage door opener. The power surge can then cause the wiring within to overheat and potentially melt or burn.

What causes a garage door not to close? ›

Check the Tracks and Rollers

If your sensors are functional but the garage door still won't close past a certain point, check the tracks to ensure there aren't any obstructions blocking progress. A bent track or damaged roller can have the same effect. Inspect both tracks to ensure there aren't any signs of damage.

How do you manually close garage door that won't close? ›

How do I close the garage door manually? If you can't get your garage door to close with the opener you still have a few options. Make sure nothing is in the path of the opener or stuck in the track. Then press and hold the wall button until the door closes completely then release the button.

How do I reset my garage door? ›

Home Repair and Maintenance - How To Reset A Garage Door Opener

How do I manually reconnect my garage door? ›

How to disengage and reengage my Garage Door Opener - YouTube

How do I close my garage door manually? ›

How to open or close a garage door with a broken opener no power

How do I reengage my liftmaster garage door? ›

Manual Disengage for LiftMaster/Sears Garage Door Opener

How do you reset garage door sensors? ›

Garage Door Safety Sensors Troubleshooting - Complete 3 Step ...

What does a blinking red light on a garage door opener mean? ›

The purpose of the safety sensors located on the bottom corners of your garage door is to automatically reverse your door if they detect motion underneath the door. If the opener cannot detect that the safety sensors are properly working or connected, then the opener lights will flash and the door will refuse to close.

Should both garage door sensors have a green light? ›

Do both garage door sensors need to be green? Your garage door has sending and receiving sensors with LED lights that should glow steadily if there are no issues with the alignment. The lights on of these types of sensors will be green if there are no obstructions or misalignment.

Do garage doors have a reset button? ›

Generally, newer garage openers have a button that will reset the system. If you own an older model, the garage opener uses a dual in-line package (DIP) to operate the system. The systems that use a DIP rely on radio frequencies and switches, while newer garage door openers use wireless signals.

How do I know if my garage door motor is broken? ›

Here are some warning signs you should watch out for to tell if you need a garage door opener motor replacement.
  1. The Garage Door Opener Vibrates.
  2. The Garage Door Opener Makes Excessive Noise.
  3. The Garage Door Moves Sluggishly.
  4. The Garage Door Can't Open.
30 Sept 2019

How do I reset my liftmaster garage door opener after a power outage? ›

My power went out and my garage door won't open. What now?

How do you trick garage door sensors? ›

So, all you need to do is hold the wall button down ( do not press and release). You must hold the wall button all the way down until the garage door hits the floor then release. If you let go of the button before the door hits the ground the sensors will kick back in to action and the door will reverse.

Can a storm cause garage door to open? ›

Storm winds will both push and pull on the garage door.

Should you use a surge protector with a garage door opener? ›

An ever essential part of the garage door opener, surge protectors ensure that an increase in electric energy will not short your electrical circuit and damage your garage door opener.

What color should the garage door sensors be? ›

Each sensor will usually have a light. One will have a green light, used to show that the units are powered up, and the other will have a red light to show that there's no obstruction between the sensors and that they're 'seeing' each other.

How do I fix my electric garage door? ›

How to Repair a Garage Door Opener - YouTube

Can you disconnect garage door sensors? ›

A garage door can cause serious injury, or even death. Alternatively, you can disconnect the sensors altogether. In most cases, this will also prevent the door from opening or closing. If you want to do this, start by disconnecting the power supply to your door opener.

Will unplugging a garage door opener reset it? ›

The first thing you will likely need to do in order to reset your garage door is to unplug it or shut off the breaker that it is connected to. This will shut off power to the door entirely. From there, you should wait at least ten seconds before turning the power to the door itself back on.

How do I reset my overhead garage door opener? ›

What you need to do first is find the button inside the newer garage opening units named 'Home' or 'Learn. ' Use the button for resetting the opener. You will see another button next to it; the LED has different colors depending on the brand. It may be purple, green, orange-red, and yellow.

How do I reconnect my garage door cable? ›

Garage Door Off Track? Check the Cable and Drum! - YouTube

How do I reconnect my garage door remote? ›

How to Connect Remotes to Chamberlain Garage Door Opener

Can you open a garage door without power from the outside? ›

From Outside:

Locate the Emergency Release Kit and insert the appropriate key into the lock socket. Turn the key and pull the lock tumbler out of the lock to engage the release mechanism on the garage door opener carriage. Lift the garage door open until it stops moving.

Can you manually lift a garage door? ›

Every modern garage should come with an emergency release kit, a system installed into your garage that allows you to manually open the door from the inside or outside.

What is the lock button on my garage door opener? ›

The Lock button turns the Lock feature on/off. This feature is designed to prevent operation of the door from hand-held remote controls. However, the door will still open and close from the Push bar and the Keyless Entry.

What do you do when your garage door is stuck open? ›

SOS! What To Do If Your Garage Door Is Stuck! - YouTube

How do I reset my garage door? ›

Home Repair and Maintenance - How To Reset A Garage Door Opener

How do I reset my garage door opener? ›

How To Reset Your Garage Door Code - YouTube

How do I reconnect my electric garage door? ›

How to disengage and reengage my Garage Door Opener - YouTube

Where is the reset button on a liftmaster garage door opener? ›

How to Erase the Memory of Your LiftMaster Garage Door Opener

Will unplugging a garage door opener reset it? ›

The first thing you will likely need to do in order to reset your garage door is to unplug it or shut off the breaker that it is connected to. This will shut off power to the door entirely. From there, you should wait at least ten seconds before turning the power to the door itself back on.

Does a garage door opener have a reset button? ›

Generally, newer garage openers have a button that will reset the system. If you own an older model, the garage opener uses a dual in-line package (DIP) to operate the system. The systems that use a DIP rely on radio frequencies and switches, while newer garage door openers use wireless signals.

What causes a garage door opener not to work? ›

Broken Tension Springs. A broken spring repair is one of the most common reasons why a garage door is not opening. Garage tension springs store mechanical energy that controls the movement of the garage door. Wear and tear could weaken the tension springs, which could lead to the garage door not working.

Videos

1. Garage Door Opener Stops and Reverses
(Mike Klimek)
2. My garage door keeps bouncing back up! Won't stay shut! Here's what will fix it!
(Terence The DIY'er)
3. What Causes a Garage Door to Get Stuck?
(A1 Marana)
4. How To Open Garage Door When Power Goes Out
(Homeowner Repair)
5. Quick Fix: Genie Garage Door Opener Won't Reengage--Model PMX500IC/B
(Julie Mae)
6. How To Disengage & Reengage Liftmaster Garage Door Opener
(Rob Greenberg)

Top Articles

Latest Posts

Article information

Author: Frankie Dare

Last Updated: 09/25/2022

Views: 5822

Rating: 4.2 / 5 (73 voted)

Reviews: 80% of readers found this page helpful

Author information

Name: Frankie Dare

Birthday: 2000-01-27

Address: Suite 313 45115 Caridad Freeway, Port Barabaraville, MS 66713

Phone: +3769542039359

Job: Sales Manager

Hobby: Baton twirling, Stand-up comedy, Leather crafting, Rugby, tabletop games, Jigsaw puzzles, Air sports

Introduction: My name is Frankie Dare, I am a funny, beautiful, proud, fair, pleasant, cheerful, enthusiastic person who loves writing and wants to share my knowledge and understanding with you.